| | |
| | |
| Digital pressure gauges HARIS SENSOR TECHNOLOGIES PVT. LTD. Digital pressure gauge (dpg- l) is developed from the technology of mems, ic chip assembly, micro electronic circuit and mechanical structures.
dpg-l is designed from micro electronic system, which has good stability and cost advantage.
product specification:
pressure range 0 to 300 psi
storage temperature 10 ~ 75°c (14~16°f)
operation temperature 0 ~ 70°c (32~158°f)
accuracy standard 0.5% of full scale
temperature stability 1% f.s. f... |  | |
| |
| General purpose gauges MANOMETER INDIA PVT LTD. These gauges are suitable for air, oil, gases and liquids that are not corrosive to copper, oil and steel and for general industrial applications such as boilers, pumps, compressors, machinery, process & chemical plants. case and bezel is drawn steel, black finish and available in bottom, back connection, direct mounting, surface mounting and flush panel mounting; available in all standard process connections npt, bsp etc. ; accuracy ± 2% ; dial size 40, 50, 63, 80, 100, 150 and 250mm. |  | |
| |
| Compact capsule gauges MANOMETER INDIA PVT LTD. These gauges are ideal for measurement of very low pressure or vacuum normally air or gas and measuring media should not be corrosive to brass & phosphor bronze material. available in dial size 63, 100 and 150 mm with choice of mounting and connection m.s. case or cast aluminium weatherproof case. accuracy of 63 mm ±3% and 100 and 150 mm ±2% standard pressure range in mmwc, mbar and inches of water column. available in ranges from 25 mbar upto 400 mbar. standard ranges 0 to 25 mbar, 0 to 40 mbar... |  | |
| |
| Diaphragm type gauge MANOMETER INDIA PVT LTD. These guages are suitable for use on corrosive gases and liquids. diaphragm materials of stainless steel with teflon protection; case material of pressure die cast aluminium, steel or stainless steel. wetted parts of stainless steel, mild steel. available in all standard process connections npt, bsp etc ;
accuracy ± 1% dial size 100mm and 150mm. pressure range from 40 millibar to 600 millibar and 0-1 kg/cm2 upto 0-21 kg/cm2. also vacuum and compound. |  | |
| |
| Diaphragm sealed gauges MANOMETER INDIA PVT LTD. Recommended where fluid is highly corrosive, contaminated, viscous or liable to crystallize inside measuring system. the gauge above the diaphragm seal is filled with silicon oil that transmits the pressure acting on the diaphragm to bourdon tube diaphragm is welded to the upper part of sealed unit and therefore it is possible to seperate the upper and lower parts to clean the diaphragm without removing the gauge. diaphragm can be ansi 316. tantalum, hastelloy c and monel. pressure gauge can be ... |  | |
| |
| | |
| Fruit pressure tester SPECTRUM INTNL This tester provides an accurate guide to determine the right period for fruit harvesting and mointors maturaion progress during cold storage.
this model ft - 327 (for apple, pear, peaches, etc)
range :- 0 - 13 kg (0 - 29 lb) |  | |
| |
| Draught gauge IMPERIAL PRECISION ENGINEERING PRIVATE LIMITED Movement materialaisi 304 ssenclosurepressed steel weather-proof to ip-65, stove enamelled grey finishmountingflush panel with back entryconnection size¼" bsp (m) compression fitting typestandard fitment1.external zero adjustment panel cutout1.150 x 78 mm2.200 x 105 mmrangecompound[mm wc] -25 to 25-50 to 50-125 to 125-200 to 200pressure[mm wc] 0 to 500 to 1000 to 1600 to 2500 to 400 |  | |
| |
| | |
| Comparison test pump SEVEN-HILL FLUID POWER Pressure testers are the pressure generation unit for calibrating pressure instruments on comparison method. in this method generally pressure instruments are calibrated against the master instrument. scope of reference calibration is to minimize the time required for calibrating a process pressure instrument. though as primary standards, dead weight testers are the most accurate instruments for the calibration of electronic or mechanical pressure measuring instruments, it requires uploading and... |  | |
| |
| Pressure measuring instruments SEVEN-HILL FLUID POWER We at seven-hill fluid power are commited to provide consultative solutions to monitor continuously pressure parameter. our solutions are from a simple gauge reading by means of visual inspection to a remote data logging. for simple indicating applications pressure gauges are provided from dial sizes 40mm to 250mm with various mounting options to meet process reading requirements. where ever the highest pressure rating is to be noted a following pointer pressure gauge is recommended to keep an e... |  | |
| |
| Pressure monitors SEVEN-HILL FLUID POWER We at seven-hill fluid power are commited to provide consultative solutions to monitor continuously pressure parameter. our solutions are from a simple gauge reading by means of visual inspection to a remote data logging. for simple indicating applications pressure gauges are provided from dial sizes 40mm to 250mm with various mounting options to meet process reading requirements. where ever the highest pressure rating is to be noted a following pointer pressure gauge is recommended to keep an e... |  | |
| |